High Risk Work Licence To Operate Personnel & Materials Hoist
CPCCLHS3002 - Class HP
Also licence to Operate a Materials Hoist
CPCCLHS3001 - Class HM
Both these courses are only delivered onsite where a fully working, compliant hoist is in operation and available for training purposes.
CPCCLHS3002 - Class HP
Also licence to Operate a Materials Hoist
CPCCLHS3001 - Class HM
Both these courses are only delivered onsite where a fully working, compliant hoist is in operation and available for training purposes.
COURSE FEE: Operate Personnel & Materials Hoist - Class HP
$850 per person PLUS successful participants must also pay $84 direct to SafeWork NSW at any Post Office for 5 year licence fee.
For Class HM - Operate a Materilas Hoist, Duration is just 2 days and fee is $705.
All other requirements are the same as for HP
What is it?
CPCCLHS3002: High Risk Work - Class HP Licence issued by SafeWork NSW
This Class HP course is a legal requirement for any person who wishes to operate a Personnel & Materials Hoist or Class HM is required for just material hoists.
It provides participants with a licence issued by SafeWork NSW.
Course Outline: (Class sizes of up to 10 participants)
To satisfy course requirements, participants are expected to complete written and practical assessment activities.
Course Pre-requisites:
Participants must be able to speak and understand English. The use of interpreters is not allowed, however, assistance with reading or writing English is allowed.
Please let us know beforehand.
Participants must be over 18 years of age, be residents of NSW and provide a minimum 100 points for Evidence of Identification, as per below.
They must also have a Unique Student Indentifier (USI)
Course Duration:
3 days from 7am to 3pm.
Day 1 and 2 - Training and Assessment by RTO. Day 3 - SafeWork NSW Assessment.
Course Outcome:
An interim ticket valid for 60 days is issued by SafeWork NSW assessor on the last day of the course.
After the course, successful applicants must pay $84 directly to SafeWork NSW to get their photo licence.
This is done at any Post Office. They take a passport sized photograph and 100 points ID to the Post Office.
Note: Participants who do not pass the final assessment can return to be re-assessed.
However, they must wait 48 hours to elapse before they are eligible for re-assessment.
Re-assessment fees usually apply.
Other Information:
What to bring:
Pre-course study materials and other information may be sent to you upon registration for the course. If so, you must familiarise yourself with these documents prior to the course. You will also need to bring them along for training.
What to wear:
- Non-slip work shoes/ boots.
- Hard Hat, High Visibility vest or clothing
(if you don't have these items, don't worry, you can be loaned them on the day)
- Courses contain practical activities which are conducted outdoors. Bring wet weather gear in case it's needed.
- Bring your lunch and/or spare change. The site is visited daily by a lunch van with sandwiches, hot food and drinks.
Rules for Evidence of Identification: Combination of documents presented must show the following 4 items:
1. Photo
2. Signature
3. Current NSW Address
4. Date of Birth
All documents must be original, and unexpired (except passport which can be less than 2 years expired).
Certified copies cannot be accepted. No other documents can be accepted.
All documents must show your full name, not initials (except council rates).
Proof Of Identity Required For Assessment. (WorkCover NSW Requirements)
(A) Primary Documents (only one of these can be used)
(If you don't have a primary document, you are allowed to use a combination of secondary documents).
(If you want to use more than one credit card, each card must be from a different bank)
Click here to open/print Info Sheet on this course. Close this window to return to main menu.
$850 per person PLUS successful participants must also pay $84 direct to SafeWork NSW at any Post Office for 5 year licence fee.
For Class HM - Operate a Materilas Hoist, Duration is just 2 days and fee is $705.
All other requirements are the same as for HP
What is it?
CPCCLHS3002: High Risk Work - Class HP Licence issued by SafeWork NSW
This Class HP course is a legal requirement for any person who wishes to operate a Personnel & Materials Hoist or Class HM is required for just material hoists.
It provides participants with a licence issued by SafeWork NSW.
Course Outline: (Class sizes of up to 10 participants)
To satisfy course requirements, participants are expected to complete written and practical assessment activities.
Course Pre-requisites:
Participants must be able to speak and understand English. The use of interpreters is not allowed, however, assistance with reading or writing English is allowed.
Please let us know beforehand.
Participants must be over 18 years of age, be residents of NSW and provide a minimum 100 points for Evidence of Identification, as per below.
They must also have a Unique Student Indentifier (USI)
Course Duration:
3 days from 7am to 3pm.
Day 1 and 2 - Training and Assessment by RTO. Day 3 - SafeWork NSW Assessment.
Course Outcome:
An interim ticket valid for 60 days is issued by SafeWork NSW assessor on the last day of the course.
After the course, successful applicants must pay $84 directly to SafeWork NSW to get their photo licence.
This is done at any Post Office. They take a passport sized photograph and 100 points ID to the Post Office.
Note: Participants who do not pass the final assessment can return to be re-assessed.
However, they must wait 48 hours to elapse before they are eligible for re-assessment.
Re-assessment fees usually apply.
Other Information:
What to bring:
Pre-course study materials and other information may be sent to you upon registration for the course. If so, you must familiarise yourself with these documents prior to the course. You will also need to bring them along for training.
What to wear:
- Non-slip work shoes/ boots.
- Hard Hat, High Visibility vest or clothing
(if you don't have these items, don't worry, you can be loaned them on the day)
- Courses contain practical activities which are conducted outdoors. Bring wet weather gear in case it's needed.
- Bring your lunch and/or spare change. The site is visited daily by a lunch van with sandwiches, hot food and drinks.
Rules for Evidence of Identification: Combination of documents presented must show the following 4 items:
1. Photo
2. Signature
3. Current NSW Address
4. Date of Birth
All documents must be original, and unexpired (except passport which can be less than 2 years expired).
Certified copies cannot be accepted. No other documents can be accepted.
All documents must show your full name, not initials (except council rates).
Proof Of Identity Required For Assessment. (WorkCover NSW Requirements)
(A) Primary Documents (only one of these can be used)
- 70 points for current Australian or International Passport,
- 70 points for Australian Birth Certificate, or birth card issued by Registrar of Birth Deaths and Marriages.
- 70 points for Australian Citizenship Certificate.
(If you don't have a primary document, you are allowed to use a combination of secondary documents).
(If you want to use more than one credit card, each card must be from a different bank)
- (40 points) Australian Drivers Licence or Learner Driver's licence/permit.
- (40 points) Current Australian Boat Licence OR Firearms Licence OR Police or Defence ID Card. These MUST have photo
- (40 points) Current Australian issued NCOC photo licence (post 2006) or High Risk Work photo licence
- (40 points) Current Australian state or territory proof of age/photo card.
- (25 points) Motor Vehicle Registration or Insurance Documents.
- (25 points) Department Veterans Affairs Card.
- (25 Points) Centrelink Card.
- (25 points) Property (Council) rates notice.
- (25 points) Property Lease Agreements.
- (25 points) Home Insurance Documents.
- (25 points) A Utility Bill e.g Water, Gas, Electricity, Telephone.
- (25 points) Bank Statement OR Credit Card/Savings Account card.
- (25 points) Medicare Card.
Click here to open/print Info Sheet on this course. Close this window to return to main menu.